1. Air circuit sealing inspection for pre-made bag rotary packing machine
Use cotton wool to gently wipe around the seal of the pneumatic component to observe the presence of oil stains on the absorbent cotton. It should meet the requirements of 5.4. b) Apply soapy water to the seal of the seal of the pneumatic component to observe whether it leaks. Provisions.

2. Production capacity test for pre-made bag rotary packing machine
After the packaging machine is in normal operation, it is continuously packaged for 30 minutes. The number of packages is counted. The production capacity is calculated according to formula (1), which should meet the requirements of the rated production capacity of the packaging machine.

v----Production capacity, the unit is bag! min; ;
M---The number of packages completed, in bags.


Additional information about the pre-made bag rotary packing machine:

Test conditions for pre-made bag rotary packing machine
Safety knowledge for pre-made bag rotary packing machine
Performance advantages for pre-made bag rotary packing machine
Technical requirements for pre-made bag rotary packing machine [3]
Specification for technical requirements for pre-made bag rotary packing machine [2]
Technical requirements for pre-made bag rotary packing machine [1]