Automatic cartoning machine - the development and progress of packaging production

In recent years, with the continuous development and strength of various industries in our country, the improvement of living standards, the increase in product quality and brand demand, the requirements for most product packaging have also been continuously enhanced, especially for food, medicine, toy hardware, and daily chemical products. The requirements for outer packaging have also been rapidly strengthened, and various multi-functional product packaging equipment such as fully automatic cartoning machine have also begun to gradually enter various industries and be widely used in packaging production.


The automatic cartoning machine automatically loads biscuits, milk powder, toys, medicine bottles, medicinal plates, ointments, etc. and instructions into the folding carton, and completes the box cover action. Some of the more fully functional automatic cartoning machines also have a sticker seal Additional functions such as labeling or heat shrink wrapping. The automatic cartoning machine feed is generally divided into three entrances: manual entrance, product entrance and machine package entrance. The whole process from machine-pack box feeding to post-packaging can be roughly divided into four stages: boxing, box opening, boxing, and box closing. The action of unloading the box is usually by sucking a carton from the feeding port of the carton by a suction cup, and going down to the main line of loading the carton. The carton is fixed by a guide rail and a push plate is used to open the carton. At the same time, there will be two directions. The front-moving card position rises from below, jams the side of the carton from the front and rear direction, so that the box opens at a right angle and moves forward to the loading area. After filling in the filling area, the mechanism of the machine will fold the ears into the left and right guide rails, and then perform the closing action. The pre-closing mechanism will first bend the tongue of the box, and then a push plate pushes the lid to bend, so that the tongue is inserted into the box and the lock is fastened. The closing action is a critical action, and the degree of completion has a lot to do with the structure of the carton and the accuracy of the machine adjustment. The early carton packaging production and boxing in my country was mainly manual boxing. Later, with the development of production and technological progress, mechanized boxing was gradually adopted.
Copyright © Hualian Pharmaceutical Machinery

Skype

hualianpm