The previous chapter explained the method of cam adjustment and forming blowing of the flat blister packaging machine. This section will introduce the blister packaging machine cam fixed parking.

       The cam is the third cam from the beginning of the substrate. The adjustment method is simpler, that is, the maximum opening is performed at each workstation. When the feed is at the nearest end, the opening is opened about 30 mm, and the roller of the micro switch is placed in the middle of the opening. . The size of the opening of this cam is related to the speed, and the size of the opening and the starting point and the ending point are determined by actual conditions.

       For example, if the feeding mechanism is not completely at the nearest end when the device is parked (in the case of ensuring synchronization), it means that the parking time is too late, and it is necessary to rotate the cam forward as a whole but not too large, and vice versa.