Analysis of universal hopper of flat blister packaging machine
       The universal hopper of the flat blister packaging machine includes a vertical brush, a roller brush, front and rear left and right panels and three motors.
       After the universal feeder is lowered, it should have a gap of about 0.5 mm with the platform guide plate (depending on the thickness of the medicine) to ensure that the PVC is not pressed against the platform. It can be adjusted up and down by the adjustment rod on the rear support of the universal feeder, and then fastened with the fastening screw. The roller brush is adjusted accordingly, so it is adjusted. The size of the PVC on the platform is about 2/3 of the thickness of the tablet. If it is too much, the tablet may be broken. If the filling rate is less, the filling rate may not be high. When adjusting, adjust the aluminum sliding sleeve (threaded and threaded with an M6 screw) fastened to the vertical brush motor.

       For more information on blister packaging machines and aluminum-plastic packaging machines, please remember our website: https://www.hlyj.net/Products/71/