Skype
hualianpm
When the blister packaging machine is in place, what should I do with the blister?
blister packaging machines (https://www.hlyj.net/Products/71/) are always two solutions for blistering when aligning:
(1) Make sure that the platform guide plate is installed in a suitable position, see Note 1 for details;
(2) The platform guide plate is parallel to the lower mesh plate, and it is determined that the feed amount has been adjusted, and the fastening screws are fastened. Make sure that the PVC can move smoothly, make sure that the feed gas clamp time is adjusted correctly, and then ensure that the total pressure is 0.6 MPa, and ensure that the compensator switch machine is inactive.
(1) Make sure that the platform guide plate is installed in a suitable position, see Note 1 for details;
(2) The platform guide plate is parallel to the lower mesh plate, and it is determined that the feed amount has been adjusted, and the fastening screws are fastened. Make sure that the PVC can move smoothly, make sure that the feed gas clamp time is adjusted correctly, and then ensure that the total pressure is 0.6 MPa, and ensure that the compensator switch machine is inactive.