Skype
hualianpm
-
Safety precautions for handling blister packaging machine
2019-06-22
Eleven specifications for safe operation of blister packaging machine : 1. During the operation of the blister packaging machine, fill in the batch record and the equipment operation record in time. 2, pay attention to molding, hot seal at the high temperature part, be careful of burns; 3. It is .......
-
Flat blister packaging machine equipment operation [graphic video introduction]
2019-06-20
Preparation of the flat blister packaging machine before operation: 1. Check that the blister packaging machine should be in a "good" state; 2. Check the compressed air pressure ≥ 0.4Mpa; 3. Check that the mold is installed properly and matched; 4, blister packaging machine check: see the follow.......
-
The composition and process flow of the blister packaging machine & cartoning machine production line
2019-06-20
The blister packaging production line is mainly composed of a blister packaging machine and a cartoning machine. According to different packaging materials, the blister packaging machine can be divided into aluminum plastic packaging machine and aluminum aluminum packaging machine; according to diff.......
-
The main components of Hualian flat automatic blister packaging machine
2019-06-19
The main components of Hualian DPB-250F flat automatic blister packaging machine : 1, the base 2, gas faucet 3, the motor 4, PYC look 5. PyC receiving shaft 6, feeding pendulum roller 7, heating box 8, molding parts 9, Jiake 10, large panel 11, heat sealing film parts 12, multi-stage cyl.......
-
Market development of blister packaging machine & cartoning machine production line
2019-06-19
With the continuous development of China's pharmaceutical industry and the increasing number of drug types, the pharmaceutical dosage forms are also continuously enriched, and the quality of pharmaceutical packaging materials and the processing and production of pharmaceutical b.......
-
Cartoning machine servo error
2019-06-17
Cartoning machine servo error failure check content: (1) Check whether the movement mechanism is overloaded. By manually, each motion mechanism is moved back and forth, reset, and the running equipment cannot eliminate the alarm. (2) Defining the specific servo motor, as shown in Figure 8. .......
-
Eleven standard specifications and safety requirements for the operation of blister packaging machine
2019-06-17
Eleven standard specification references for blister packaging machine operations: 1. Dial the power switch to open the water supply valve; 2. Press the preheat switch and heater switch to respectively heat the PVC heating roller (adjust to 155~160°C), aluminum foil heating roller (adjust to 185~1.......
-
Cartoning machine failure content
2019-06-15
The cartoning machine cannot be successfully transferred to the specified position after entering the paper folding machine. 1, troubleshooting: (1) Check if the instructions are sucked into the paper folding machine through the nozzle. (2) Check the instructions for slippage in the paper folding.......
-
Recommended for automatic rotary packing machine for food packaging
2019-06-15
GD8 - Pre-made bag rotary packing machine Pre-made bag rotary packing machine Scope of application： 1、Applied to detergent, rice wine, soy sauce, Vinegar, fruit Juice, ketchup, Peanut pulp, jam, chili sauce broad bean Paste, ketchup, fruit juice, hand Sanitizer, e.......
-
Advantages of Hualian Pharmaceutical Blister Packaging Machine!
2019-06-15
Four characteristics of Hualian Pharmaceutical DPB-260/330HL blister packaging machine: Features 1. Mold interchange: As an improved version of the traditional 250 model, the mold and the old model are completely versatile, which is a good choice for the old customers to upgrade. Features 2. M.......
-
Analysis of the problem that the cartoning machine can not inhale the paper folding machine
2019-06-13
Cartoning machine failure problem: Occasionally, the instruction manual cannot attract the paper folding machine. First, check the following five steps to check the failure of the cartoning machine one by one: (1) Check the pressure value of the pressure to 0.6 bar. If the compressed air pressure.......
-
Rotary Packing Machine for liquid, laundry detergent, hot pot bottom, peanut butter, tomato sauce
2019-06-13
Today introduced a Rotary Packing Machine, mainly for liquid packaging, such as the common laundry liquid in life, hot pot bottom material, peanut butter, tomato sauce, chili sauce, etc., can be completed with this machine of. This liquid bag-type packaging machine is mainly composed of a main b.......
-
Some problems with poor heat sealing of blister packaging machine
2019-06-13
Blister packaging machine side heat sealing Reason: The heat seal roll is not parallel to the heat seal roll Remedy: Adjust the balance screw on the heat seal frame Pouch packaging machine periodic heat sealing failure Reasons: 1. Net roller shaft deformation 2 mesh roller surface damage Remedy.......
-
Reasons for poor heat sealing of blister packaging machine
2019-06-12
Reasons for poor heat sealing of blister packaging machine: 1. The temperature is too low or too high 2. Heat sealing pressure is too large or too small 3. There is dirt on the net roller 4. Aluminum tube adhesive layer is uneven Bad solution for heat sealing of blister packaging machine: 1........
-
What should I do if the sealing temperature of the rotary packing machine is out of control?
2019-06-12
1. The thermometer for sealing the rotary packing machine is broken and must be repaired. In addition, the thermocouple may be broken and the induction temperature cannot be normally transmitted to the thermometer. Replace the thermocouple with the same model and the same specification. 2. The heat.......
-
The cartoning machine has no alarm, and the product does not push the box into the device.
2019-06-12
The contents of the cartoning machine failed: During the normal operation of the cartoning machine, without the alarm, the product does not push the box into the device. Not only the loss of products, but also the potential safety hazards of the equipment. Check the content: Check the incomin.......
-
Reasons and solutions for the operation of the blister packaging machine
2019-06-11
Reasons why the blister packaging machine is out of sync: Need to check the following three points: 1. Heat-sealing the rolling die to make the formed bubble tape shorter or longer. 2. The position of the tangent or print batch number is not allowed. 3. The edge of the punched board is not allow.......
-
Solutions for abnormal noise in the operation of rotary packing machine
2019-06-11
1. Main reasons: The rotary packing machine is damaged or worn seriously, and the lubrication is poor. First, follow the sound that is emitted to find the fault location. Disassemble the back protection board and find that the "beep" sound is transmitted from the gearbox. Remove the fixing screws on.......
-
Cartoning machine secondary equipment facilities professional maintenance (once a year)
2019-06-11
Twelve specifications for the maintenance of the secondary equipment of the cartoning machine: (1) Disassemble and inspect the bottle, the chain of the bottle refilling system is well lubricated, and there is no mechanical wear and broken teeth that obviously cause loss of function. (2) Disassembl.......
-
Cartoning machine level equipment and equipment professional maintenance (half a year)
2019-06-10
(1) Check the paper folding system manual of the cartoning machine. The motor conveyor belt is visually inspected for no cracks and gaps, no missing teeth and slipping. (2) Check the carton system box conveyor of the cartoning machine, visually inspect the structure without cracks and gaps, without.......