Skype
hualianpm
-
Causes and solutions for poor bubble forming in blister packaging machine
2019-06-10
Reasons for poor bubble forming in blister packaging machine: 1. The air flow in the place is too large. 2. The temperature in the heating zone is too low to become too high. 3, the cooling water flow is too large, taking away too much heat 4, air pressure is not appropriate 5, decompression fi.......
-
pre-made bag rotary packing machine fuse blowing fault handling method
2019-06-10
What should I do if the fuse of the pre-made bag rotary packing machine is blown? The following three steps are the perfect solution 1. Check if the power supply is normal, then turn off the power, and use the resistance file to measure whether the switch is damaged. 2. Check the line and mo.......
-
Cartoning machine repairman monthly inspection inspection work arrangement
2019-06-06
Cartoning machine maintenance department inspection inspection (monthly - time) (1) The main motors of the cartoning machine include the servo motor of the bottle, the servo motor of the paper machine, the servo motor of the box, and the servo motor of the product silo. The operating current, the o.......
-
What is the difference between a pre-made bag rotary packing machinee and a fully automatic pre-made bag rotary packing machine?
2019-06-06
What is the difference between a pre-made bag rotary packing machine and a fully automatic pre-made bag rotary packing machine: the pre-made bag rotary packing machine is mainly composed of a coding machine, a PLC control system, a bag opening guide device, a vibration device, a dust removal d.......
-
Blister forming step of blister packaging machine
2019-06-06
Blister forming step of blister packaging machine The blister packaging machine is heated by heating, the upper and lower heating plates are closed, and the PVC plastic sheet is preheated between the upper and lower heating plates, and after preheating, under the action of traction, the blister for.......
-
Daily maintenance of the cartoning machine
2019-06-05
Six guidelines for daily maintenance of the department of the cartoning machine (1) Observe whether the compressed air pressure is between 0.5 and 0.8 MPa by using a pressure gauge before use. (2) Start the cartoning machine as the reference operation observation device alarm information, without .......
-
Bag opening rate test for pre-made bag rotary packing machine
2019-06-05
After the pre-made bag rotary packing machine is stably operated, the bag is continuously opened for 30 minutes, and the number of unopened bags is counted according to formula (3), which should meet the requirements of 5.7. L-opening rate, %; A- - the number of bags that have not been opened, i.......
-
Selection of blister packaging machine
2019-06-05
The blister packaging machine has many structural forms, including a single blister substrate structure and a double blister non-substrate structure, and the packaging material mainly consists of a blister-forming thermoplastic film and a backing substrate. The substrate is also a major component o.......
-
Detailed analysis of the sealing device of the automatic cartoning machine
2019-06-04
(1) Packing machine sealing device consists of 2 sets of tongue seal pendulum, pressure box, walking (paper) box chain, upper cover box, swing box, holding belt and rejecting device. (2) The tongue seal pendulum block mechanism is a whole operation (continuous action) in which a right-angled stainl.......
-
Bagging rate test for pre-made bag rotary packing machine
2019-06-04
After the pre-made bag rotary packing machine is stably operated, the bag is taken continuously for 30 minutes, and the number of empty catches and bags is counted. The bag-taking rate is calculated according to formula (2), which should meet the requirements of 5.6. In the formula: S-.......
-
Basic requirements for operators of aluminum-plastic blister packaging machine
2019-06-04
Eight basic requirements for equipment operators of aluminum-plastic blister packaging machine (1) To understand the basic working principle of the entire equipment. (2) To understand which parts may cause instability or problems. (3) To understand what the normal state of the equipment is. (4) .......
-
Batch device for automatic cartoning machine
2019-06-03
The principle and characteristics of the batch number device of the automatic cartoning machine: (1) The batch number of the cartoning machine consists of: batch number pressure wheel, batch number installation wheel, transmission group. (2) The batch number device principle and structure of the c.......
-
Basic principles and methods for troubleshooting blister packaging machines
2019-06-03
When the blister packaging machine fails or problems, it cannot be blindly repaired directly. 1, must understand the cause of the failure of the blister packaging machine before the exclusion (1) Ask or check the maintenance record. (2) Ask the captain of the aluminum-plastic packaging machine or.......
-
Air circuit sealing inspection and production capacity test for pre-made bag rotary packing machine
2019-05-31
1. Air circuit sealing inspection for pre-made bag rotary packing machine Use cotton wool to gently wipe around the seal of the pneumatic component to observe the presence of oil stains on the absorbent cotton. It should meet the requirements of 5.4. b) Apply soapy water to the seal of the seal of .......
-
Heat sealing mechanism of blister packaging machine
2019-05-31
The basic principle of blister packaging machine equipment: heat sealing mechanism 1. Composition of heat sealing mechanism of aluminum-plastic blister packaging machine Hot-pressure drive roller, heat seal roller, rocking support frame, cylinder (behind the substrate). 2, th.......
-
Cartoning machine push box device composition and principle
2019-05-31
Cartoning machine (1) The push box mechanism of the cartoning machine consists of: push rod, push block, power transmission chain set, motion track, protection device, push specification stainless steel plate, etc. (2) Key points of the carton pushing device: pusher push-out distance, push-in sh.......
-
Cartoning machine suction box workstation movement instructions
2019-05-30
The movement description of the cartoning machine suction box workstation is as follows: Turning the handwheel, the turntable is transported clockwise. The four equal-divided planetary gears drive the ventilation shaft, and connect the suction cup base to the suction cup fo.......
-
Detailed explanation of the photographic inspection device of the blister packaging machine
2019-05-30
Basic principle of blister packaging machine: camera detection device 1. Composition of photographic inspection device for blister packaging machine Camera, display (system), housing, reflective base. 2, blister packaging machine photography detection principle .......
-
The composition and working principle of the lower box device of the cartoning machine
2019-05-29
(1) Cartoning machine The components of the lower box device: turntable, suction cup, carton library, open box push block, carton chain, detection, etc. (2) The working process and working position of the cartoning machine: Carton library, turntable, suction cup, open box, pap.......
-
The role of the blister packaging machine guide platform
2019-05-29
The basic principle of the blister packaging machine: rail platform 1, the blister packaging machine guide rail platform Ensure that the PVC is in the center of the geometric design for easy heat sealing and die cutting as well as the synchronization of blanking and photograph.......